Polyurethane track is a professional sports field paving system with polyurethane (PU) as the core material. It is composed of polyurethane prepolymer, mixed polyether, waste tire rubber, EPDM particles, etc. As a competitive material certified by the IAAF, it has the following core characteristics:
The impact absorption rate of polyurethane track is 35%-50%, which can reduce the damage of sports impact to joints by 40%. The fully plastic track uses pure polyurethane elastomer with an energy return rate of ≥20%, helping athletes to increase their sprint speed by 0.2-1.03 seconds and long jump results by 20-30 cm.
The permeable drainage structure design can drain the accumulated water within 30 minutes after heavy rain. The surface anti-slip particles (friction coefficient ≥0.7) and the non-porous structure ensure that there is no accumulated water bubbling on rainy and snowy days, and meet the stable use in extreme climates from -40℃ to 120℃.
The wear-resistant life is 8-15 years, and the anti-ultraviolet formula can keep the color from fading for 10 years, reducing the maintenance cost by 70% (only need to rinse with clean water, local repair does not need overall renovation).
Solvent-free products have completely eliminated the traditional TDI (toluene diisocyanate) and MOCA systems, with a VOC content of ≤5g/L, and passed the EN71-3 toy safety standard, REACH regulations and GB 36246-2018 environmental certification. ETPU runway (thermoplastic foam particles) uses 100% recyclable materials, and the impact absorption rate is increased to 35%-50%.
Base layer: 50-100mm thick asphalt or concrete foundation, flatness error ≤3mm/3m, moisture content ≤5%, acid washing is required to remove floating dust and lay a waterproof film to isolate groundwater.
Buffer layer: polyurethane slurry mixed with black rubber particles (particle size 2-4mm), thickness ≥10mm, providing uniform elastic support.
Surface layer: pure polyurethane slurry is scraped flat and then sprayed with EPDM colored anti-slip particles (particle size 0.5-3mm), thickness 1.5-3mm, and the two-way spraying process ensures seamless integrated molding.
Basic treatment: site cleaning → brushing primer → flatness detection (3-meter ruler error ≤2mm, qualified rate ≥85%) → drainage slope calibration (horizontal ≤1%, vertical ≤0.1%).
Layered construction: mechanical paving of the bottom layer (glue and particle ratio 1:6-1:8) → curing for 24 hours → surface spraying of EPDM particles → marking (total station positioning error ≤2mm) → put into use after 7 days of maintenance.
| Turi | Features | Ilova stsenariylari |
| Full Rubber Running Track | Pure polyurethane elastomer, no particle additives, World Athletics Class 1 certified, thickness 13-15mm | Professional events (e.g., Olympics, World Championships) |
| Permeable Running Track | Porous drainage structure (permeability ≥0.6mm/s), EPDM particle surface layer, cost-effective and rapid installation | Campuses and communities in rainy regions |
| Prefabrik yugurish trassasi | Factory-preformed rolls (rubber content ≥60%), 30% enhanced tear resistance, supports quick deployment | Commercial venues, temporary facilities |
| ETPU Eco Running Track | Thermoplastic polyurethane foam particles, 100% recyclable material, impact absorption rate up to 50% | Children’s play areas, green building projects |
Mahsulotlarimiz mahsulot sifatini sinash uchun turli fizik/kimyoviy sinovlardan o'tadi va faqat yuqori sifatli mahsulotlardan ishonch bilan foydalanish mumkin.
UV va qarishga qarshi test
Kuch samaradorligi testi
Polyurethane prepolymer + mixed polyether + rubber particles (such as EPDM or waste tire rubber particles).
It must pass SGS, EN71-3 and GB 36246-2018 certification, VOC≤5g/L.
Base layer (asphalt/concrete), buffer layer (polyurethane + rubber particles), surface layer (anti-slip particles).
Use solvent-free formula (such as ETPU track) to eliminate TDI and MOCA materials.
Impact absorption rate 35%-50%, vertical deformation ≤3mm, thickness ≥13mm.
20 yillik texnik tajribaga ega million tonna mahsulot liniyasi hozirda Xitoyda eng ilg'or hisoblanadi. Keng assortiment, sifatli, qulay narxlar va zamonaviy dizaynlar bilan bizning mahsulotlarimiz maktablar, bolalar bog'chalari, xavfsizlik gilamchalari, sport zali, piyodalar ko'prigi, parklar, yo'llar va boshqa jamoat tadbirlari, pol qoplamasi joylari.
Biz kauchuk taxta materiallari va PU biriktiruvchi ishlab chiqaruvchilarmiz. Barcha mahsulotlarimiz Idoralar, ROHS, SGS, ISO va boshqalar kabi sertifikatlarga ega bo'ladi. Mahsulotlarimiz Buyuk Britaniya, Germaniya, Finlyandiya, Ispaniya, Polsha, Turkiya, Saudiya Arabistoni, BAA, Yaponiya, Avstraliya, AQSh, Kanadaga eksport qilinadi. , Kolumbiya va boshqalar 40 dan ortiq mamlakatlar.
Qadoqlash haqida
25 kg EPDM bitta sumkaga, bitta paletga 40 ta paketga qadoqlangan
Yetkazib berish haqida
Qisqa etkazib berish muddati (5 ish kuni ichida)
Bizning mahsulotimiz fabrikamız tomonidan ishlab chiqarilgan 100% ekanligini kafolatlaymiz, barcha mahsulot yaxshi material va qat'iy sifat nazorati bilan.
Biz ko'p yillar davomida ishlab chiqaramiz, xom ashyo yetkazib beruvchi bilan ishonchli va uzoq muddatli munosabatlarga egamiz, bizning mashinamiz bizning asosiy vositalarimizdir, ishchilar tajribaga ega, biz xarajatlarni boshqa zavodlarga qaraganda yaxshiroq nazorat qila olamiz.
Biz tajribali fabrikamiz, shuning uchun bizni ko'plab mahalliy loyihalar topadi, biz 14 yil ichida o'rnatish bo'yicha katta tajribaga egamiz. Bizdan buyurtma berganingizdan so'ng sizga ko'rsatma beriladi.
Bizning savdo xodimlarimiz 24 kishi onlayn, vaqt farqi yo'q.
Barcha mahsulotlar mijozlarga bepul namunalar bilan ta'minlanishi mumkin.
Sotishdan keyingi 4 kishilik jamoa xizmatlarimiz bor va ularga nisbatan qat'iy qoidalar va baholash mavjud. Har qanday muammo o'z vaqtida hal qilinadi.
Bizning professional jamoamiz yuqori sifatli, malakali qurilishni ta'minlaydi, jarayon davomida yuzaga keladigan umumiy muammolarni samarali hal qiladi. Katta tajriba va tafsilotlarga e'tibor bilan biz ishonchli echimlarni taqdim etamiz va har safar loyihaning muammosiz va samarali bajarilishini ta'minlaymiz.
Biz shuningdek, aralashtirish mashinasi, yulka mashinasi, purkagich, astar mashinasi, isitish plitasi, isitish roligi, qo'l molga bilan ta'minlay olamiz.
Biz Dow kimyoviy va Kelton kabi import bokira kauchukdan foydalanamiz
Mahsulotimiz sizning rangingizga moslashtirilgan. Uni hajmda ishlab chiqarishdan oldin rang va sifat talabga mos kelishini tekshirishimiz kerak.
Quyidagi shaklni to'ldiring, biz tez orada bog'lanamiz.
