Guia per eliminar les superfícies del parc infantil EPDM de les llars d'infants
Taula de continguts
El paviment d'EPDM a la llar d'infants és un paradís perquè córrer i jugar. Tanmateix, amb el pas del temps, el paviment d'EPDM envellirà inevitablement. L'envelliment del sòl no només té un aspecte danyat, sinó que també presenta molts perills de seguretat, i els treballs de demolició són urgents.
Today, let’s talk about how to safely dismantle the EPDM Flooring in the kindergarten after aging.
Hazards of aging EPDM Flooring
After aging, the surface of the EPDM Flooring will fade, crack, and bubble. The cracked Flooring is easy for children to trip and fall; and the bubbled part may suddenly burst when the children are playing, causing accidental injuries. In addition, the aging EPDM material may release some harmful gases, and being in such an environment for a long time will affect the health of children. Therefore, timely dismantling the aging EPDM Flooring is an important measure to ensure the safety and health of children.
Careful preparation before demolition
Personnel arrangement
Establish a special demolition work team, and the team members should include experienced demolition workers, safety supervisors, and staff familiar with the kindergarten environment. The demolition workers are responsible for the specific demolition operations, the safety supervisors should always supervise the safety issues in the demolition process, and the kindergarten staff are responsible for coordination and communication to ensure that the demolition work will not have too much impact on the normal teaching order of the kindergarten. At the same time, all personnel involved in the demolition work must undergo pre-job training and be familiar with the demolition process and safety precautions.
Tool preparation
Prepare appropriate demolition tools according to the actual situation of the EPDM Flooring. Commonly used tools include shovels, electric picks, cutting machines, etc. Before using these tools, carefully check whether their performance is good to ensure that there will be no failures during the demolition process, affecting the demolition progress or causing safety accidents. In addition, safety protection supplies such as safety helmets, gloves, goggles, etc. should be prepared to provide necessary safety guarantees for demolition personnel.
Site isolation
Before the demolition work begins, the EPDM Flooring should be enclosed with a cordon, and obvious warning signs should be set up to prohibit unrelated personnel from entering the demolition area. At the same time, ensure that the roads around the demolition area are unobstructed so that people can be evacuated quickly and demolition materials can be transported in an emergency. For classes in kindergartens that are in session, sound insulation measures should be taken in advance to minimize the interference of noise generated by demolition work on teaching.
Safety points during demolition
Careful demolition
During demolition, the order from edge to middle and from top to bottom should be followed. First, carefully pry open the fixed part of the edge of the aged EPDM Flooring with a shovel, and then gradually push it towards the middle. For parts with larger areas and stronger bonds, electric picks can be used for demolition, but attention should be paid to controlling the power and operating force of the electric picks to avoid excessive damage to the ground base. During the demolition process, always pay attention to changes in the Flooring. If there are signs of looseness, collapse, etc., stop the operation immediately and take corresponding safety measures.
Dust control
When dismantling the EPDM Flooring, a large amount of dust will be generated. This dust will not only pollute the environment, but may also cause damage to the respiratory system of the demolition personnel and kindergarten teachers and students. Therefore, effective dust control measures should be taken. Spray dust reduction devices can be set up around the demolition area to spray water to reduce dust at regular intervals; demolition personnel should wear dust masks to reduce dust inhalation. At the same time, try to choose to carry out demolition work in weather with less wind to reduce the spread of dust.
Properly handle demolition materials
The demolished EPDM materials are solid waste and should be properly handled. They cannot be discarded at will to avoid environmental pollution. You can contact a professional recycling company to recycle the recyclable parts; for materials that cannot be recycled, they must be transported to designated landfills for landfill in accordance with environmental protection requirements. During transportation, the demolition materials must be sealed and packaged to prevent them from being scattered during transportation.
Cleaning and follow-up work after demolition
Cleaning and follow-up work after demolition
Site cleaning
After the demolition work is completed, the site must be thoroughly cleaned. Clean up the remaining EPDM fragments, dust and other debris to ensure that the site is flat and tidy. At the same time, the damage that may be caused to the ground base during the demolition process must be inspected and repaired to prepare for the subsequent laying of new Flooring.
Safety inspection
Carry out a comprehensive safety inspection of the overall environment of the kindergarten to check whether other facilities and equipment have been damaged or left safety hazards during the demolition process. If problems are found, they must be rectified in a timely manner to ensure that the safety environment of the kindergarten is restored.
In short, the demolition of the aging EPDM Flooring in the kindergarten is related to the safety and health of the children and must be taken seriously. Through careful preparation, strict adherence to safety regulations, and post-demolition cleanup and inspection, we were able to successfully complete the demolition task and create a safer and more comfortable environment for the kindergarten.
Comentaris
Productes
Casos
Productes de venda calenta
Blog passat
Guia per eliminar les superfícies del parc infantil EPDM de les llars d'infants
El paviment d'EPDM a la llar d'infants és un paradís perquè córrer i jugar. Tanmateix, amb el pas del temps, el paviment d'EPDM envellirà inevitablement. L'envelliment del sòl no només té un aspecte danyat, sinó que també presenta molts perills de seguretat, i els treballs de demolició són urgents.
Guia de selecció del gruix del lloc EPDM
Molta gent es preguntarà quan escolliu EPDM, com més gruixut sigui el lloc d'EPDM, millor? De fet, el gruix del local d'EPDM és molt particular i s'ha de determinar segons diferents escenaris i necessitats d'ús.
Construcció de rampes de goma EPDM per a cadira de rodes per a discapacitats
En un moment en què la societat està cada cop més preocupada per la comoditat dels desplaçaments de les persones amb discapacitat, la construcció de rampes per a cadires de rodes per a persones amb discapacitat és de vital importància.
Contacta amb nosaltres
- [email protected]
- +86-25 58933771
- Parc industrial de Qiaolin, districte de Pukou, ciutat de Nanjing
Etiquetes
Blogs relacionats
Quines són les condicions d'instal·lació de les vies prefabricades?
En el context actual de creixents requisits per a instal·lacions esportives, les pistes de córrer prefabricades s'han convertit en la primera opció per a moltes escoles, estadis i altres llocs a causa del seu excel·lent rendiment i mètodes d'instal·lació convenients.
Guia per a la superfície de pistes de córrer per tot temps
Aquest article s'endinsa en el món de la superfície de pistes de córrer per tot temps, explorant els diferents tipus de superfície disponibles i els factors clau a tenir en compte a l'hora de seleccionar la millor opció per a la vostra pista d'atletisme.
Com reparar la pista de cautxú prefabricada?
Aquesta guia ofereix instruccions per a la reparació i el manteniment de pistes de goma prefabricades utilitzades en instal·lacions esportives i recintes esportius.